Recent Tweets

Winter Tips: How to shoot in the snow




With winter well underway we thought it was time to put a few tips together for anyone looking to go out and shoot in the colder months.  If you get a chance to take photos in the snow (for the lucky few that actually get snow in this big old country of ours), there are a few things to keep in mind.  Below are a handful of things I discovered while walking the streets of Europe during the coldest months and dealing with snow, sleet and rain.
The first thing anyone will tell you is that keeping your camera’s batteries warm is a necessity. This is spot-on as the cold temperatures can dramatically reduce the performance of your batteries.  When possible, keep your batteries housed within an internal pocket so that they are warm and retain their charge better.  Make sure they are fully charged at the start of each shoot and have a spare one handy as batteries lose charge quicker in cold weather.  Always be ready to shoot!
Pay careful attention to your exposure.  Some scenes that are predominantly white may cause confusion to your exposure metering system and attempt to underexpose the photo, giving a greyish look to the snow instead of a crisp white.  If this is happening you can either set your exposure manually to get the result you want or overexpose the photo by 1 to 1.5 stops on the exposure recommended by your camera.
Be mindful of where you step to ensure you don't leave footprints throughout the scene.  An ideal solution is to wake up and trek out early before the snow begins to melt and before people walk around, leaving footprints everywhere.  I was lucky to be in Hyde Park, London where it had snowed the night before and made it to the park first thing in the morning.  I captured some great shots of the park while it was almost deserted with a thick layer of snow on everything. By around 10:30am it had reduced to a snowy mush and looked decidedly less photogenic.
If you choose to shoot in JPEG then make sure your white balance is set to daylight so the snow will appear white.  If you know how to set a manual white balance in your camera then this could also be done using a photo of the snow although in theory this should give you the same white balance setting as the 'daylight' option.   If you shoot in RAW then disregard this advice as you will have a colour balance option during your RAW conversion.  I always shoot in RAW as it provides maximum control during post-processing. 
If your camera has no weather seals then take precautions to keep it dry.  My Canon 5D MKII DSLR is weather sealed and has survived through rain, snow, sleet, and hail with zero adverse effects.  I hate passing on photo opportunities and some of my best shots were taken during difficult weather scenarios.  Make sure you check for snow or water drops on your lens that will show up in the photo.  If moisture is present, ensure you dry it as soon as possible!  If your camera is not weather sealed then be extra cautious when water is present as cameras and water generally don't go well together and water damage is not covered under manufacturer’s warranty.
If you wish to shoot portraits in the snow then consider encouraging the subject to wear a bright, bold colour in order to draw attention to them so that they don't get 'lost' in the frame.  Red generally works quite well.
Dress appropriately for the weather. Think warm.  If it’s going to be windy then keep this in mind as the temperature can drop rapidly due to the wind chill factor.  One of the coldest days for me was in Edinburgh when the temperature was approximately 2oC but then the wind picked up and it felt like I was in a deep freeze with the wind punching through every tiny gap in my clothing. I don't normally wear gloves while shooting but on occasion it has been necessary. This is when being experienced with your camera and knowing where all the buttons are is handy so that when you can only feel them with limited tactile feedback, the task is no challenge for you.
Acclimatise your camera when you go back inside.  I keep mine safely housed in my camera bag and under no circumstance will I ever remove the lens from the body until I am certain that the camera has reached the room’s ambient temperature which typically takes at least half an hour.  If you don't take this precaution then condensation may form inside your camera which can only lead to undesirable outcomes.
Finally, as with any form of photography, be on the lookout for any kind of photo that may present itself from macro to the grand-vista.  
If you do get a chance to shoot some winter photos then share your pics on this blog or with our Facebook community for live feedback and prize giveaways! We LOVE seeing photos taken by our talented customers and community fans!

Good luck and stay warm this winter! 

 - Marc @ DCW

Portrait Photography: A Beginner's Guide

This blog post will guide you through all the necessary steps to recreate successful studio lighting using Canon flashguns that can be set up in almost any situation, though the same setup may be achieved with other brands in a similar fashion.  Shooting in a studio or similar scenario is an excellent way to learn how light can affect your photos.  These lessons can be used in any photographic situation, be it a highly controlled studio setup or shooting with natural light in an uncontrolled environment.


DCW's Portrait Photography Demo at Sydney Morning Herald's Photo1440 Workshop


The following are some general rules for lighting -

1) The larger the light source when compared to the subject, the softer the quality of the light that falls on the subject. This is because the larger light source wraps around the subject, softening the edge of shadows.  As the light source gets smaller you’ll notice the shadow edges become more defined.

Moving a large light source closer to the subject also has the effect of softening the shadows while moving the light away makes the edge of the shadow sharper and more defined.        

If you diffuse a light source, the light scatters and results in a softened quality as the diffuser essentially becomes the light source. For example - On a bright, sunny day the shadows are strongly defined as the light source is far away i.e. the sun. If passing clouds then block the sun, the light will soften as it becomes diffused by the clouds, thus simultaneously drawing the light source closer as the clouds now become the source.  So you can look at it two ways - the hard light source is now diffused OR the light source is now very large and close.

2) Bouncing a hard light source off a wall onto your subject effectively creates a larger light source.

This occurs by making the wall a light source.  As the wall is much larger than the size of the flash, the light also becomes a lot softer.  This requires a greater power output from your flash as some light is lost from the wall and the light also has to travel further to reach the subject.  Be aware of the colour of the wall as the light from your flash will change to whatever colour the wall is i.e. red wall equals red light, green wall equals green light, etc.

3) Front lighting diminishes texture, side lighting (from any direction) emphasizes texture and rear lighting highlights the shape of the subject.

The direction of a light source has a big affect on the appearance of texture in an image. Lighting from the side will increase the appearance of texture on surfaces while light hitting the subject from the camera position will flatten the texture in an image. To achieve this, the light should be un-diffused as a diffused light source will soften the shadows and may even eliminate the texture. Light from behind the subject highlights the shape of the subject; a prime example of this would be a silhouette.

Some general portrait photography tips -

1) A messy background will interfere with a good portrait. That is unless the background helps to tell the story of the portrait.  For example - a violinist may have a portrait taken with their violin in the background to tell the viewer more about the subject.  If the background doesn’t assist the story then blur it out as much as you can with a large aperture or if possible, get rid of any distracting elements completely.  There’s nothing flattering about seeing images of people with trees sprouting from their heads.  

2) Have the lighting set up and the camera ready to go before your subject arrives so that they won’t have to wait for you upon arrival.
3) In portrait photography the primary area of interest and focus is almost always the eyes.  As humans, that’s where we look first. Because of this it’s critical that the eyes are in focus.

​4) The direction of a subject’s eyes is also very important in a portrait. Having the subject return the gaze of the photographer can give the viewer a sense of connection with the subject.  An alternative is to have your subject looking at someone or something within the shot, which sets up a story in the image.  The most obvious one is a mother with her child looking at each other.  If you imagine that same photo with the mother looking directly at the camera and not her baby, the image immediately shifts to a completely different vibe.
​5) Portraits are most commonly taken at the same eye level as the subject. Playing around with the angle can give a different perspective to the portrait. For example, shooting down on your subject from above, or up at them from ground level can change the viewer’s perceptions of the inherent power of the subject.

​6) Firing a number of shots at a time can either give you a series of images that work together or it can help you achieve one image that is natural. This is useful when you’re photographing somebody engaged in an activity or when working with kids.
Lighting Setup


The following is a list of steps to recreate our portrait set up.  In this example we used 3 Canon 600EX RT flashes, 2 60x60 Mircopro soft boxes and a Honl light shaper (for the hair light).

Step One.

Flash 1 is set up with the soft box at a 45 degree angle to the subject.  The light in this photo is softer than a direct flash due to the soft box and off-centre position which creates a nice modelling effect upon our subject.  This light is referred to as the key light or main light as it is responsible for the primary lighting effect in the shot.  At this point the line between the lit part and the shadow is nice and gradual but the shadow area is quite dark. I set this flash at +1/3 exposure compensation to make the image a bit brighter.

Step Two.

To lighten this area we require a second light from the opposite side of the subject.  This light needs to be less powerful than the key light so it doesn't eliminate the modelling effect the shadow creates.  I set the power of this light to half of the power of the key light and use the same soft box on it.  This will lighten the shadows to even out the contrast while still keeping the shadow areas present but to a lesser degree.  I set this light at -2/3 exposure compensation.

Step Three.

Now we need to add a bit more light to the hair of our subject to create a bit of shape.  For this I put a Honhl flash bender onto the third flash.  I’ve put it into the shape of a snoot, which is simply a tube made to funnel light into a specific area of a photograph.  In this case I want the light to fall onto the hair of our subject to highlight it and give some definition and shape to the subject. To do this I simply aim the snoot towards the subject directly from the other side of the key light.  Also make sure you have a bit of height so you are shooting the light at more of a downward angle.  This has created a highlight effect that helps the image to pop and adds a bit more depth.  This light is set to +/-0 exposure compensation to make the highlights stand out when compared to the second flash.

So there you have it. A simple, quick technique for studio lighting to get you started.  Off-camera flash is a great way to begin learning about how different angles and quality of light can change the look of the subject.  Once you are confident in using flash then it is easier to know how the quality of existing light will look in your photos.  Using flash is also a really good way to train yourself to understand how different lighting can affect the photo you take and also trains you to identify lighting conditions and ways you can manipulate it to obtain a good result.